Results 1 to 6 of 6

Thread: 96 Lt1 tune for 355 le3 with cc306 A4

  1. #1
    Carb and Points! Bullit's Avatar
    Join Date
    Sep 2015
    Age
    42
    Posts
    9

    96 Lt1 tune for 355 le3 with cc306 A4

    Does anybody have a great tune that I can look at?
    For the same set-up in Title, Thanks.
    Just here to learn more about tuning
    using JET DST and ECMpro Scan currently

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    It seems the 94 ~ 95 model years have more tuning options and better overall interest.

    Maybe switch to a 94 ~ 95 PCM?
    For example:
    http://fbodytech.com/
    http://www.gearhead-efi.com/Fuel-Inj...rmation-EE-EEB
    http://www.gearhead-efi.com/Fuel-Inj...E-tuning-thing!

    Minimal cost and technical details to switch PCM! Emissions testing in your area might still require the 96 PCM?

    dave w

  3. #3
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    automatic transmission makes that a pain, though. brian knows how. since this guy already owns the software he should probably use it

    it's true that total cost of converting to OBD-I and tuning it is generally lower than buying appropriate tuning software for OBD-II, though ('specially since the software for OBD-I is free, and a used ecm is $80-100)

  4. #4
    Carb and Points! Bullit's Avatar
    Join Date
    Sep 2015
    Age
    42
    Posts
    9
    I would have but I bought the JET DST and ecmpro scan and I just wanted to look at the fuel and timing maps.
    my base tune is from pcm4less and my timing at 80 kpa and up is at 32 degrees,
    I was thinking about adding more timing but wanted to look at somebody else fuel maps.
    Just here to learn more about tuning
    using JET DST and ECMpro Scan currently

  5. #5
    Fuel Injected! Performance SS's Avatar
    Join Date
    Apr 2014
    Age
    59
    Posts
    33

    97 Z28 A4 Cam - Note several codes off, see notes section in file.

    Here's the closest I have for your 1996, the 1997 should be the same. Just change your vin, check tire size, gears (this is a 3.42- I think). This is an older tune, the car is now all drag and running different combo.

    Just message me if I can help you. You asked for a Great Tune, I'm sure this may not meet that definition, as each car needs to be tuned based on it on modifications, condition and environmental conditions. Just use this as a bases to try or a starting point.

    Steve

    Try the 97z28 355 cam A4 file, I mistakenly uploaded the earlier file. I went back and looked at the file - timing and fuel is close to stock, some changes were made to MAF scaling and I also think this car has 30# injectors. It's a pretty basic tune, but ran low 12's with a modest build.
    Last edited by Performance SS; 04-19-2016 at 09:35 PM.
    1995 Z28 Camaro Turbo PT76GTS 9.61@ 148
    1995 TransAm ProCharger D-1 10.52@ 142

  6. #6
    Carb and Points!
    Join Date
    Mar 2017
    Age
    44
    Posts
    3
    Is the ecmpro scan for data logging? I just purchased the JET DST a while ago and am learning as I go. I am wondering if learning how to use a datalog will help me get a lil bit better performance out of my '96 Impala. Thx, Tony

Similar Threads

  1. Base Tune or close to spec tune for 0411 SBC406AFR-HSR
    By evilstuie in forum OBDII Tuning
    Replies: 47
    Last Post: 08-20-2020, 05:58 PM
  2. 383 Tune
    By jd89vette in forum Introductions
    Replies: 1
    Last Post: 08-31-2015, 09:33 PM
  3. 454 with 350 tune
    By myburb in forum GM EFI Systems
    Replies: 1
    Last Post: 06-05-2015, 01:15 AM
  4. MAF tune
    By itsonlyanlt1 in forum TunerCat OBDII
    Replies: 8
    Last Post: 08-03-2014, 04:57 AM
  5. Need help with a tune
    By 1leg in forum GM EFI Systems
    Replies: 3
    Last Post: 02-26-2013, 06:10 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •