Results 1 to 2 of 2

Thread: 87 LT8, 4.1 Cadillac brougham ALDL scan

  1. #1
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,475

    87 LT8, 4.1 Cadillac brougham ALDL scan

    A0022.ds PCM pn 1227056
    Anyone successfully logged these PCMs.
    I found that it needs some bpw grounding on Pin b.
    Is there any other way to enter ALDL mode and force PCM to spit data.
    I doubt there is a device that is readily available.

  2. #2
    billygraves
    Guest
    Cadillac On-Board diags will give data via the HVAC by holding OFF and Warmer at the same time. You should have a crib sheet to understand and navigate the systems. Off-board the GM Tech-1 will access ECM data if I remember right. Tech-1 will keep all the systems running at a slow pace.
    The data link is run by the Master of the link. (BCM, IPC, HVAC, ABS, ECM ect) The master sends out a request $F0 or is there anyone out there. Off-board must respond to the master with in a spec time and instruct the master to stop. If you do respond to the system and get the ECM, the systems go into default if you do not keep the others on the link satisfied with data needed to carry on. HVAC will go full defrost with heat, IP will not function ect ect. Best of luck
    Last edited by billygraves; 03-19-2016 at 05:15 PM.

Similar Threads

  1. Scan Tool Data Help
    By Kaweh in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 05-12-2015, 12:15 AM
  2. 68 Cadillac TBI
    By blue68deville in forum Gear Heads
    Replies: 8
    Last Post: 10-31-2014, 02:02 AM
  3. 91-93 Brougham Roadmaster Ecm's 16136965
    By Tunedperformance in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 05-05-2012, 02:16 AM
  4. Cadillac 500 to TBI
    By Avalanche in forum GM EFI Systems
    Replies: 33
    Last Post: 03-08-2012, 03:16 AM
  5. TunerPro Rt used as a scan tool?
    By mudbuggy in forum TunerPro Tuning Talk
    Replies: 21
    Last Post: 01-10-2012, 03:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •