Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: E38 full flash using TC

  1. #16
    Fuel Injected!
    Join Date
    Jun 2014
    Posts
    229
    I have a lot of 2007 and 2008 files. If you post the cal that you read out of the E38, I will look for one with the same 7 and 8 segments.

  2. #17
    Well I updated my roadrunner software and the code patch was available. Funny since I was only 1 or 2 versions behind.
    Truck is running now

    Thanks folks, appreciate all the help

  3. #18
    Let's see if somebody has a calibration compatible with this ECM. This is the ECM the truck came with and was flashed somewhere else. It was running on 4 cylinder only (3,5, 2 and 8 running, the other 4 have no pulse). I checked wiring from injector to ECM and it's OK.
    So I tried another ECM, disabled vats and it ran fine.
    I want to flash the original ECM with a stock CAL before dumping it, I suspect the flash is bad but I don't have a compatible one to test.

    Best Regards.

  4. #19
    Fuel Injected!
    Join Date
    Jun 2014
    Posts
    229
    Segments 7 and 8 (the one's that can't be changed with tuning software) are correct for that VIN. It looks like the original 4.8L LY2 4L80 calibration was reflashed with tuning software with a 5.3L LY5 4L60 calibration.

  5. #20
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    here is a stock cal for that vin

Similar Threads

  1. NOOB constant Full knock retard I NEED Help
    By 94s10blazin in forum GM EFI Systems
    Replies: 43
    Last Post: 11-14-2015, 02:24 AM
  2. No PE at full throttle...
    By Scrufdog in forum GM EFI Systems
    Replies: 2
    Last Post: 08-16-2014, 02:51 PM
  3. Replies: 10
    Last Post: 07-23-2014, 05:24 PM
  4. 4l80e full manual with no computer
    By EagleMark in forum Gear Heads
    Replies: 1
    Last Post: 02-01-2014, 04:54 AM
  5. ECM 1227748 Full Retard
    By evilcowboy420 in forum GM EFI Systems
    Replies: 4
    Last Post: 11-12-2013, 11:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •