Learning to Tune Need HELP

**chevreligionz28** · 03-12-2016

Hi everyone!
In advance, thanks for your help.

I have a 1994 Z28 that is in dire need of a tune. I have on my laptop Scan9495 and Tunerpro RT as well as winflash. I have a 94 auto .bin file but when I load it and conne t to the car its like tunerpro doesn't recognize what's going on. I have the Moated ALDL and Cabl1. I setup the tunerpro to recognize the cable and it tests as running. Can I get some guidance from you guys?

**f85gtron** · 03-12-2016

Assuming you haven't already, You'll need to install and setup the proper .adx file for your ecm in tuner pro.
Adx=tells tuner pro how to connect to ecm
Bin=software that runs ecm
Xdf=tells tuner pro how to interpret bin

Hope this helps. Its confusing at first, but one day it will make sense.

**chevreligionz28** · 03-12-2016

Thatnk you f85gtron, I have a bin and ADX but no XDF file. do you know where I could source an .xdf file for my car? Im going to start looking so I may have one found before you reply, I don't ant to seem like a total lazy person.

**f85gtron** · 03-12-2016

Try here http://www.gearhead-efi.com/gearhead-efi/def/

**steveo** · 03-13-2016

reccommend you use this definition for tunerpro: http://fbodytech.com/eex-tunerpro-definition/

and this datalogger: http://fbodytech.com/eehack-2/download-eehack/

i probably wouldn't bother with tunerpro for datalogging that lt1 unless data tracing is something that you need. my tool is built specifically for your lt1 and does waaay more