WBO2-Tuning Spreadsheet

[dave w]

The spreadsheet formulas are set up for the following columns:

Column AJ=Closed (Closed Loop Status) - Open loop data will not be calculated - your Test csv1.csv has all open loop data in Column AK, so even if Column AK data was copy / pasted in Column AJ the spreadsheet would not show data. The spreadsheet filters out open loop data.

Column DT=On (Idle Flag Status) On = Near Idle data ~ Off = Off Idle (the main motivation for the spreadsheet in the first place!)

Column FD=Inactive (Power Enrichment) PE - Active ~ Inactive - The spreadsheet has a separate sheet that will calculate the AFR's when PE is Active.

Column O=Inactive ( Acceleration Enrichment) AE - Active ~ Inactive - The spreadsheet filters out AE active data.

Column HK = AFR Data

You could copy / paste your spreadsheet columns so they will align with the spreadsheet formulas?

dave w

[Kitch]

Hi Dave,

I played around with my data log and moved things around so that the csv file could be copied directly into your spreadsheet without cutting and pasting.
The only manual change I had to make was to change all the AJ "open" loop cells to "closed" to make it work.

On a side note I also managed to break my dashboard slightly, any idea how to add the missing block?

[dave w]

On a side note I also managed to break my dashboard slightly, any idea how to add the missing block?

Nice work, figuring out the .csv configuration for the WBO2 spreadsheet!

Maybe you need to reconfigure a gauge and set a value, using the Acquisition edit menu, see attached pics.

[Kitch]

Yep, you were right.
I'd tried to do it before but I couldn't figure it out (must have been too late at night!), I had another look at it and straight away I could see the segment percentage values. All I had to do was create another gauge and figure out what percentages were needed based on the surrounding segment values and there it was!

[Stokes1114]

Hey Dave, I was wondering if I could get a copy of the WBo2 spreadsheet? I looked through this thread and couldnt find any files. Also, does the spreadsheet allow for WBo2 through the autoprom? or do I have to wire to egr pintle?Thanks in advance

[dave w]

I re-posted the .zip file, look back at post #1 of this thread. ... dave w