WBO2-Tuning Spreadsheet

[CDeeZ]

Nevermind I got past the password protect I had to enable editing, oops.


I have tried pasting in the entire CSV file generated by TPRT into the spreadsheet, as well as pasting just the AFR data into it. Also pasted in the existing VE tables of course and the spreadsheet keeps spitting out the exact same values of the existing VE tables? What am I missing here?

[dave w]

Please post the TPRT .ADX file and .XDL file you are working with.

Gregs Advanced $OE TP5 v252.xdf definition file is for editing the .bin file, not data logging.

dave w

[CDeeZ]

[dave w]

The spreadsheet "Filters" out open loop data (Column AJ). Only "Closed Loop" is used by the averageif formulas. All the data in the 1234test.csv IS "Open Loop", so the spreadsheet will "Filter" out all the data from the 1234test.csv.

dave w

[CDeeZ]

So is there any way to make it work for something that is running open loop? I was considering running this thing in open loop full time and adjusting if/when necessary.

I think it must not be going into closed loop because there is no NB02 in there currently. Was hoping I could just stay
Open loop and rely on the wideband exclusively.

[dave w]

Yes, the spreadsheet will work if you change the data in Column AJ from "open" to "closed". See post #31 thru #33 in this thread.

dave w

[CDeeZ]

Dave, thank-you for explaining that again. I changed the entire AJ column where the data is located to closed and it works. Very nice spreadsheet you put together, thank you!

Question:

All of the changes made to the Open Throttle VE table were a reduction in VE, as I would expect based on the rich AFRs during the capture of that particular log. However, there are 3 cells in Idle VE table that were modified by the spreadsheet that were all an increase in VE.... Two cells in particular, that are the same RPM and KPA between both tables, cells were increased in the Idle VE table, and, decreased in the Open Throttle. Possibly a spike of irrelevant data causing the discrepancy?