Two sessions of Tuner Pro is possible, but not connected to two separate devices from each session. Only one session at a time can be connected to external hardware. This can be a bit annoying when you are trying to connect with a second session and forget that the first session is still "connected" (hardware not released) when trying to quickly switch back and forth. This goes for both emulation and datalogging. Got caught on that one a few times. :/Originally Posted by dave w
There is dual emulator support for in TunerPro RT used with Nissans that use split VE tables, but not sure if that is locked to Nissan applications or not. Whole tables should be uploaded to both Ostrichs, but Mark (that writes TunerPro) would know better how it's configured. But by the time you buy two Ostrich 2.0s and get everything set up, a Megasquirt 2 that will natively run an odd fire engine would be more cost effective and work better in the end. *shrug* '7747s are not known for high speed calculations, so staying in sync between a pair of them I still believe is going to be an issue when the engine gets some load on it.
Reply With Quote
Bookmarks