Results 1 to 15 of 93

Thread: Odd Fire TBI

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 08-09-2016 #24
    dave w
    dave w is offline
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,345
    Quote Originally Posted by 1project2many View Post
    Agreed. Getting it to run is a good plateau to rest on. Fuel pressure at 12-13 psi is good. I'd aim for as much common ground between the two systems as possible. Do you have the info to change the number of cylinders to three? I can dig that up...
    When I change the cylinder select value, Hex address 0016 changes. I think changing the Hex value to 03 would be the correct value?

    See attached screen shot for an example of a 3 cylinder BPW (1.9 liters is half of a 3.8 liter V6 / figuring two 45 lb TBI injectors).

    dave w
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« ALDLDroid for datalogging and dashboard | Ignition On_Starter On Relay »

Similar Threads

  1. Batch fire/Single Bank Fuel on 0411 possible
    By Fast355 in forum OBDII Tuning
    Replies: 4
    Last Post: 05-15-2015, 07:59 PM
  2. Batch fire sequence
    By myburb in forum GM EFI Systems
    Replies: 3
    Last Post: 03-14-2015, 07:05 PM
  3. UGH! need to squash SFI/batch fire argument
    By 34blazer in forum GM EFI Systems
    Replies: 22
    Last Post: 07-28-2013, 08:04 PM
  4. Need help tpi fire and stall confusion
    By Aholt91ss in forum GM EFI Systems
    Replies: 0
    Last Post: 06-29-2013, 11:16 PM
  5. Choosing injectors for batch fire MPI.
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 24
    Last Post: 11-15-2011, 02:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules