Engine swap put a vortec motor in non vortec truck and runs horrible

[dave w]

" then at least talk to the tuner about modifying the PCM so you can use a more readily available and easier to program flash chip."

Here is the thread I started on the flash chip conversion.

http://www.gearhead-efi.com/Fuel-Inj...rsion-(27SF512)

Link to Moates.net Burn2 which is what I use to burn flash chips. http://www.moates.net/burn2-chip-pro....html?cPath=64

Modify the ECM for Flash Chip, then burn the chips with the Burn2.


dave w