hey hello there i have the Jet DST software and had to try on two GMC sierra 2011 and 2008 5.3 v8
i want them to bounce off the rev limiter quickly for what i did is went to
constant>system parameter>extreme fuel cutoff RPM 6100 extreme fuel resume RPM 6098
table>system table> fuel cutoff vs RPM changed both Park and Neutral to 6100
no when i test it i goes all the way to 6100 and stay there without bouncing off
help please
help is very appreciated
ASAP
Why would iy bounce off? You have the defuel set at 6100 and refuel at 6098 rpm. Try increasing your deltas to around 6100defuel and 5900rpm refuel.
Not sure why you want this to happen though.
peace
Hog
That will make it slower I did try it but it didn't work
What specifically are you trying to achieve ?
The Rev Limiter system uses an RPM margin (hysteresis) to modulate the Maximum RPM (where a Fuel cut will occur), and the subsequent Re-enable RPM (where Fuel will be re-enabled).
"Bouncing" off the Rev Limiter is common jargon - but not exactly how the system works.
I am trying to achive this in the video see when he WOT it bounce off see the video please
https://www.youtube.com/watch?v=RVRxiWveej4
Posting Permissions
Reply With Quote
Bookmarks