I have a question about ve tuning with a WB. when I put hedders on my engine I had to relocate the NBo2 which caused the readings to either be slow or way off. I thought since it was a heated sensor this wouldn't be an issue, but it made tuning using BLM's a nightmare. Since then I added a WBo2 connected to my autoprom. I'm still chaseing my VE tables around. The issue I think I am haveing is AE and decel skewing the numbers tunerpro is collecting in a histogram. As I understand it if I was using blm's, learns would be disabled while AE and decel were active. Is there a way to filter this data out? how do other people tune part throttle via WB?