Hi guys, can someone explain the Injector Offset Adder Table
I'm using the EEXTRA.xdf file for a '95 LT1 8051 pcm. and also Steveo's 3.6 XDF

OK The Injector Voltage Offset table is pretty straight forward (adjust injector for voltage variations).
The Injector Offset Adder I understood was to cover the dead time before the injector is fully open.

I'm wondering if the two headings are swapped around?
It has two columns:
Adder (usec) and BPW(usec)

The fixed column: adder goes from 488usec to 1952usec whilst the BPW is editable

Can anyone confirm this is wrong in the XDF

Thanks
Mitch