Has anyone using TCII upgraded to windows 10 yet?

[freshda9]

I'll give it a ry on the bench flasher tomorrow. Im awaiting support from TC on an issue for my VM but i am afraid to try anything outside of XP OS as I too have seen ecms brick on other OS.

[EDZIP]

I have an extra pcm with DIP sockets so if it bricks, just reflash the chips and try again. That's how I determined my ALDL cable was bad, used another cable and Win 10 flashed nicely.

[freshda9]

was doing some bench flashing with TC2 and Win10 so far no failures even with a full flash.

[antus]

If your having problems with missing OCX files on win7 or win10 (or I would assume win8.x too) put the attached OCX files in the documented locations (different for 32 and 64 bit OS) and run the regsvr32 commands from the readme in a command prompt with admin access.

[Playtoy_18]

I'm back to stripping it all out and trying again.
Everything worked fine except only a few VDF's would work.
I think one of my biggest issues,that has always given me problems,is from using the old serial disc,then using the usb update disc etc..
Anybody have a clean install for USB from when they bought new?
i've got the link for TC site to what should be a full install but it's giving me issues.
Have deleted all now for the 3rd time and going to try again.

[ony]

when I went to windows 10 I had problems with not having administrater privilegas till I right clicked on program icons and changed them

[Playtoy_18]

I've done everything I can think of including that.
Now i'm getting file path errors.
I'm gonna check out this virtual machine I guess.
Now even my original xp pro backup laptop is giving me issues.

[IntheBatCave]

If your having problems with missing OCX files on win7 or win10 (or I would assume win8.x too) put the attached OCX files in the documented locations (different for 32 and 64 bit OS) and run the regsvr32 commands from the readme in a command prompt with admin access.

Hi I'm new to the site, I'm dusting off an S10 project that has been sitting for nearly five years and I'm nearly ready to get it back on the road again. I have a copy of Tunercats that I haven't even had on a running laptop in at least the same amount of time. The only laptop I have now is running Windows 10, and I found this place, and your post trying to figure out how to get it to work. I downloaded your zip file but when I open it up it I only found 32bit ocx files. Any help is greatly appreciated.