9360361 (1999) and 9381344 (2000) have their respective parameters at the same hex address. 1290003 is an EFILive COS for 12225074 (used by Holden from 2001 through 2004), and is completely different.Originally Posted by john h
The XDF may support 9360361 and 9381344, but cannot support 1290003.
Corrected supported OS info. I read some bad info. Can anyone confirm that the xdf will work with the 1999-2001 LS1 Holden .bin file. I could not find one.
Last edited by john h; 07-07-2016 at 07:00 PM.
If you based your work on the XDF on 9360361 and 9381344 (which are essentially the same), then these are the only two operating systems that are compatible with your XDF.
As far as your question about 1999 to 2001 Holden operating systems, these used several operating systems, and your XDF is only compatible with 9360361 and 9381344.
I did base it on those OS's. The reason I ask about the Holden cars is Tuner CATS states that there definition file for the 1999-2001 LS1 cars also works with 1999-2001 Holden. They are not specific on what models. Most likely LS1 and the same OS numbers.
When working with, or creating an XDF, it is more accurate to think in terms of the operating system, rather than just the vehicle.
When it comes to Holden, sometimes they used the same operating system as North American vehicles, and sometimes they did their own thing.
Some 2000 Holdens used operating system 9381344, which should be compatible with your XDF.
Yeah, so far I've had a couple of weird OS's from Holden PCMs.
I've now got a Holden LS1 MAFless tune with COS3 1290003 unlocked that I'll post up this afternoon.
I wish I had the XDF for this one as at the moment I was told it had VATS removed but when I loaded the .BIN in EFI Live v7.5 it said VATS was still on Class-2, plus its for a manual and I need an Auto 4L60E.
I don't suppose anyone is able to modify it and send back a copy with the changes once I upload?
That's not an easy task. I had to find certain parameters in this xdf that were not in tuner cats but are in other tuner software. Lot of it is trial and error. Might be easier to just buy efi live or pay someone to do it.
I don't know why you would choose to run an EFILive COS, as you can't adjust any parameters using Tunerpro without a matching XDF.
Post the bin if you want. I can swap in the auto trans segments and disable VATS.
Last edited by LRT; 07-08-2016 at 03:39 AM.
Posting Permissions
Reply With Quote
Bookmarks