Hi there GearHeads,
I was sent here by some nice people from the AstroSafari forum.
I saved an Astro (1991) after it was abadonned in the field for more than 6 years. Pretty succecfull as the van has passed technical examination and I've already driven 3000km since.
But it's not (yet) in top condition.
ecu is trowing tons of codes that I would try to read out with the paperclip method :)
Meanwhile I built a ALDL to USB cable (with arduino chip) that works with WINALDL
at least I get data-flow (rpm /tps ...)

But now I'm stuck .
I cannot get TunerPro or similar linked up?
What could be wrong ?

kr
Bob