Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Z28 LT1 $EE Tuning issues

  1. #16
    Fuel Injected! Terminal_Crazy's Avatar
    Join Date
    Oct 2015
    Location
    Lancashire England
    Posts
    410
    OK guys. I sat one night and played with Steveo's EEHack and played withe the idle settings.

    Basically playing with Timing & Idle speeds to find the sweetest idle.

    I started at 1000 rpm and dropped 50 rpm each time then swept idle timing between 25 & 40 degrees.

    I've written (cobbled) some software to filter the logs similar to a recent post by John Ballard ('95 383 LT1 Corvette). There was also one linked on LT1PCMtuning.com by Christian Millard.
    I averaged MAP for each advance for each of the requested idle rpm's.
    I averaged Injector Bpw again L&R against each advance for each rpm.
    I also wanted to compare the variation of the idle speed vs the commanded idle speed so have calculated an RMS value for the difference.

    Anyway...
    Obviously the higher the idle speed the better the overall idle quality.
    Interestingly the lowest idle speed i was able to manage was around 450 as the IAC was hitting zero. It was struggling to get lower but didn't stall. I guess enough air is leaking past the throttle body.

    The car seems to want 39 degrees timing. Average MAP is lowest. Injector bpw seem to match much more closely.

    I was under the impression that 383's would need less timing and 39 sounds a lot. Every other 383 seems to be about 34. Would the bigger ports & valves cause it to need more due to slow and laggy airflow ?
    I also only had knock showing up on the low 20's advance. Upto 41-42 degrees never lit the dial.

    I still need to get underneath & double check the exhaust isn't catching but the weather here is a bit grim at the moment.

    Just thought i'd update with some findings.

    I now have more thoughts & questions on filtering log data and analysing it. Anyone interested in a seperate discussion on analyzing log data in general ?

    Thanks
    Mitch

  2. #17
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    idle and timing in general is also a 'by feel' thing. it's not just getting the most vacuum or most efficient burn, although those things are nice. at a certain point when advancing timing, MAP will increase or decrease by only a tiny bit for a while. this is a plateau during which extra timing doesn't matter. you want to tune it to the very beginning of that plateau to avoid excess combustion temperature and higher emissions.

    ~40deg advance at idle seems kinda nutbar to me

  3. #18
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    I now have more thoughts & questions on filtering log data and analysing it. Anyone interested in a seperate discussion on analyzing log data in general ?
    oh definitely as long as i can steal any good ideas for eehack ;)

Similar Threads

  1. code59 tuning issues
    By Superbee in forum GM EFI Systems
    Replies: 112
    Last Post: 08-08-2015, 06:58 AM
  2. TBI issues
    By Tylerz281500 in forum GM EFI Systems
    Replies: 42
    Last Post: 02-28-2014, 05:09 PM
  3. 95 K3500 (454) tuning issues
    By 454/4X4 in forum GM EFI Systems
    Replies: 45
    Last Post: 07-29-2013, 07:42 AM
  4. Search issues
    By 1project2many in forum GearHead EFI Forum Support
    Replies: 10
    Last Post: 03-26-2013, 05:08 AM
  5. TPI issues
    By webbs in forum GM EFI Systems
    Replies: 5
    Last Post: 02-02-2013, 01:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •