1995 K1500, Stock LO5, 4L60e, 3.73 gears, 265/75-16 tires, L&L Products Ultra-flow headers into 2-1/2" Y-pipe and 3" single exhaust
From the photo it looks like you're running standard non self alining roller rockers.
I could be wrong on this but I thought if you had standard tip roller rockers and round pushrod holes in the head then you needed to use guide plates.
95 GMC K2500, 4l80e, 4.10 gears, 355 L05 4-bolt block, ARP rod bolts, Speed-Pro H423DCP-30 pistons, moly rings, 217 heads, vortec cam, TBI mods, cop car injectors, headers, 2 1/2" Y-pipe and 3" single exhaust with high flow muffler and cat.
95 GMC K2500, 4l80e, 4.10 gears, 355 L05 4-bolt block, ARP rod bolts, Speed-Pro H423DCP-30 pistons, moly rings, 217 heads, vortec cam, TBI mods, cop car injectors, headers, 2 1/2" Y-pipe and 3" single exhaust with high flow muffler and cat.
Bookmarks