1994 GMC Jimmy 4.3l CPI

[KC5UEA]

Hi all,

I am new to this site and am looking for information on reading the PCM in my Jimmy. It has PCM Serv. No. 16196395 BHRJ along with a small "piggy-back" module 16124425 that I would assume is for the Vehicle Speed Sensor?

I have downloaded TunerPro RT and several files for it, such as the "BHRJ 94 S-T Truck 4.3CPI with 3.08 or 3.42 gears.bin", "A219_0E_31_v250.adx", and "0E_TPV5_v250.xdf" that I found here on this site, but am looking for the ones needed to work with this PCM to allow me to "datalog" the truck, such as the "A217 $0D TP5 v250.adx" mentioned by another member as being the correct one for the PCM in my truck.

Mike S.

[1project2many]

Is your calibration $0D? $0D files are in the 7427 $0D information thread.
http://www.gearhead-efi.com/Fuel-Inj...Information-0D

I often have better luck using google to search the site than the site's own search engine.
type what you want to search for followed by "site:gearhead-efi.com." Here's an example

[KC5UEA]

I appreciate the info.
I can only guess at this point which calibration it has: based on the fact it has a 4l60e I think it would be the $OD as the $OE seems to be for the 4l80e(?)
I d/l 'ed all the files needed for my ecm so that when I get the interface hardware I'll be able to monitor what's going on.

Thanks for the help.

Mike S.

[1project2many]

Somehow I missed the 4.3 part of this. Yes, it should be $0D.