Results 1 to 4 of 4

Thread: ALDL modes

  1. #1
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,008

    ALDL modes

    im going to actually go and document all of the aldl modes in $ee

    so in $EE i understand the following modes which i understand some other ECMs use:

    MODE1: READ DIAGNOSTIC INFORMATION
    MODE2: READ 64 BYTE DATA SEGMENT
    MODE3: READ BYTES OF ARBITRARY MEMORY (UP TO 84?)
    MODE4: TESTING (ACTUATORS, TIMING, FUELING)
    MODE5: ENTER PROGRAMMING MODE (ENABLE MODE6)
    MODE6: UPLOAD AND EXECUTE PROGRAM SEGMENT
    MODE8: DISABLE CHATTER
    MODE9: ENABLE CHATTER
    MODEA: CLEAR MALF CODES
    MODED: SECURITY CHALLENGE/RESPONSE (ENABLE MODE5)

    but i can't quite figure out these guys:

    MODE7
    MODEB
    MODEC

    anyone have any insight?

  2. #2
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    MODE 07 is used for module to module communication. For example in the Y array the PCM exchange data with CCM ABS, through this mode.
    Most interesting is for traction control there are two system, one is analog, other uses ALDL communication.

    MODE 0C is used for writing CALid and VIN to EEPROM tside memory
    I have the information available how to do it.
    f4 .. 0c 01 [VIN IN HEX-17 bytes]
    f4 .. 0c 02 [CAL ID HEX-4 bytes]
    I haven`t tested it but it should work like this.

    Mode 0b is still undefined. The way it is configured i guess it`s not used in this application.

  3. #3

  4. #4
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,008
    thanks for that, i wrote vin and cal id# programming into my next tool release. there's no verification, it seems you can program any phrase you want into it as long as it's 16 bytes. my vin is now BLKTRANSAM!

Similar Threads

  1. My aldl does not look right!
    By scottyd in forum GM EFI Systems
    Replies: 3
    Last Post: 12-17-2014, 03:08 AM
  2. ALDL wiring...
    By mytmouz in forum GM EFI Systems
    Replies: 2
    Last Post: 06-24-2013, 02:50 AM
  3. USB/ALDL cable
    By Cricket_crawler in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 04-15-2013, 08:45 PM
  4. ALDL Question
    By Cricket_crawler in forum GM EFI Systems
    Replies: 2
    Last Post: 02-12-2013, 01:02 AM
  5. $8d 8192 Baud Asynchronous Communications Data Stream Modes. ECM Guy
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 0
    Last Post: 12-09-2011, 07:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •