I see your point and we will keep it that way.
EEhack patches must be kept as simple as possible and only connected with the main features of eehack.
If anyone wants more stuff, than it should apply other patches manually.
I figured a real simple solution for the fuel mode control.
Before apply the patch make a simple check in the bin
check eside byte_2028 bit $02
if 0 load
6193 eside
B6 20 28 85 02 ==> B6 00 2F 85 08
Maf primary mode ==> switch to SD
if 1 load
6193 eside
B6 20 28 85 02 27 ==> B6 00 2F 85 08 26
SD primary mode ==> switch to MAF
I would like to keep the ALDL stuff separately.
Can you please on the next version of patch make some simple correction of the eside aldl patch
Keep stock bin data unchanged at 82f7 till 8336 and from 6f78-6f79 I add some pointers and move data that was really not needed
Bookmarks