Searched high and low. Cant find any info on what modifications to the lsx harness aside for stand alone is needed to run tpi. Any help would greatly appreciated
Searched high and low. Cant find any info on what modifications to the lsx harness aside for stand alone is needed to run tpi. Any help would greatly appreciated
How are you triggering the 0411? Converted vortec or 24x?
The info I have found you use vortec distributor as cam sensor only and efi connection 24x wheel with a vortec timing cover and sensor. But I cant find the harness info to make all that work
I wired my 24x system identical to a 2000 Chevy Pickup 5.3 liter. See attached .pdf
dave w
Nice thanks. I'm assuming I would use tpi:tps,iac vortec:distributor,cps. express van knock but don't know what year or engine and 5.3 everything else
There are several details I'm needing to know about your project to accurately say which parts to use.
The schematic I posted above is for Drive by Wire.
I think you actually need a Drive by Cable Schematic. see attached
dave w
Bookmarks