Hi,

I joined this forum a week or so ago and have spent a lot of time reading different threads and posts trying to get a grip on tuning and basically trying to wrap my head around everything that's here and about it so here's my situation and any help would be greatly appreciated:
I have 93 4.3 CPI out of an S-10 blazer that had the 4L60E trany, I am installing this into an old 81 CJ7 and also am putting an NV3500 5 speed from a 97 S-10 4x4 truck. I would love to learn a lot more about programming and modification but at this point all I want to do is get the engine running and not look for the transmission behind it.
1st, I can't seem to find a .bin file that fits my application with the 5 speed and CPI (or the 700r4 code would work to I think?), so if any one has information on that I'd be very grateful if you'd send it my way. 2nd, I'm confused about what PCM my engine is using: I have seen application lists that tell me the service number is 16197427 but my PCM box has 16168625 and the "unstuck" label of 16179571. I have found more 4.3CPI .bin files with $0D but there are references to the 93 4.3 using $E6. So I am confused and can't make sense of all the different numbers and files.
I want to simply re-flash or get a new chip and flash the correct code to for my eng and trans. I think once I can accomplish that it will all start to come together for me. I work as a network engineer so computers and programming don't intimidate me, my dad was a mechanic, and got my A&P license after serving in the Army as a helicopter crew chief so all this stuff you guys know is right up my alley. Please help me learn.
Thank you so much!