Changing from $88 to $8D mask, bin.

[fasteddi]

What the heck is that? I can't even identify engine or vehicle? Is that home plumbing pipe I see?

It started as adding a pause, then was determined to need a byte added to reply, some seem to need both? You got an adx for it? Post it up and I'll see what's there and show you how to change them.

Heres my ADX ive got. Thanks mark!

[dave w]

What the heck is that? I can't even identify engine or vehicle? Is that home plumbing pipe I see?

The engine is GMC 305 V6, in an early 60's pickup. The turbo is a down draft configuration, so the input air to the turbo is drawn through the carburetor. Yes, home plumbing pipe.

dave w

[fasteddi]

I tried to stop the glitch on my own but no sucess... Im hoping I can start the car up in a week to 2 at most, so I hopefully get this glitch gone!!

[EagleMark]

How do you get a glitch with car not running?

New Jersey Giants won so I can take a look at it... doesent Six Shooter run this?

[EagleMark]

Someone has a lot of work into this. But it does not have much in the commands? Does $59 have it's own ALDL file? Or does it get set to your ECM like we did the last one? That was $88 right? I wonder if it's supposed to hook up to differant ECMs differant ways?

Sorry I am $59 ileterate...

[Six_Shooter]

The code is the same, regardless of whether it is running in a '7749 or a '7730.

I can't help with the communication problems, $59 has always connected for me on both my laptop and my PC. :shrug:

[EagleMark]

Even the connection commands? His has a silence but it's not in the macro? When I did the $88.adx for his ECM it needed differant stuff? Can I see your $59 adx? I'm doing a lttie research on it...

[fasteddi]

How do you get a glitch with car not running?

New Jersey Giants won so I can take a look at it... doesent Six Shooter run this?

Im glad the giants won!!!

But anyways the aldl connects instantly with this code compared to the $88 The glistch is exactly the same one I hade before with $88.
I just turned the ignition on to see what codes the comp was telling me, and wanted to make sure that the data was being transferred well. It works great else then the glitch.
Yea sixshooter uses $59, so i poseted on code59 and if i cant stop the glitch ill pm him and see which ADX version he uses.

Thanks!!!

[EagleMark]

I was looking at it, then did some reading at code 59. Seems most of those guys are using the 7749? Which has differant ALDL base? Although your changing code in bin too there was somthing about your car ECM that needed silenced, then ask for data. The ADX you posted has a silence command, but it's wrong and not used in any connection or data, it's just a command not used.

I read a big thread over there and lot's of work but there missing a couple major points. When I have time I'll look through it again and we will do some testing again to get you going. It may help them guys get better connection because even the latest version seems to still get a glitch. We'll ger er done!

[fasteddi]

I was looking at it, then did some reading at code 59. Seems most of those guys are using the 7749? Which has differant ALDL base? Although your changing code in bin too there was somthing about your car ECM that needed silenced, then ask for data. The ADX you posted has a silence command, but it's wrong and not used in any connection or data, it's just a command not used.

I read a big thread over there and lot's of work but there missing a couple major points. When I have time I'll look through it again and we will do some testing again to get you going. It may help them guys get better connection because even the latest version seems to still get a glitch. We'll ger er done!

Thanks mark!! You know your stuff when it comes to files and tuning forsure!!!

[EagleMark]

Thanks mark!! You know your stuff when it comes to files and tuning forsure!!!

Your overestimating my abilites. I just try hard to learn, teach back. Just part of a good team!

[fasteddi]

Your overestimating my abilites. I just try hard to learn, teach back. Just part of a good team!

Totally understand, Ive gave it a shot at trying to manipulate what you did in those $88 adx files, but i got lost and had no results... That glitch is very innoying.. Im sure I can still do a start up even with the glitch, but I do not want to do that!!

[EagleMark]

I;ve been busy, we'll get er done! Your not ready yet are you? How long?

[fasteddi]

I;ve been busy, we'll get er done! Your not ready yet are you? How long?

Ill be ready by a week from friday, so in 1 1/2 weeks, ill have it ready to start up. Mainly because I havent gotten my SLC-diy-2 wideband in the mail yet...

[fasteddi]

Ive been playing with the ADX file again and no luck... How do i add a pause if there isnt one in the command type chooser? The only thing like pause, is command and listen for silence
??