Results 1 to 2 of 2

Thread: 1990 GMC EFI 385 CID stroker

  1. #1
    Electronic Ignition!
    Join Date
    Oct 2015
    Location
    Moreno Valley , CA 92551
    Age
    73
    Posts
    13

    1990 GMC EFI 385 CID stroker

    Hello, I'm new to tuning ECMs/PCMs and just joined this forum. I have a 1990 GMC Jimmy, 385 CID stroker w/MPFI conversion to my 1227747 ECM. Edelbrock 2209 Hydraulic Roller Cam, Shorty headers, Edelbrock MPFI intake manifold conversion (3201). Heads have been cleaned up, 2.02 intakes 1.6 exh. The conversion uses the TBI throttle body for TPS and IAC, the stock injectors and regulator are removed and a block off plate installed. I opened the intake and smoothed the plenum to adapt the larger BB throttle body assembly for more CFM. I also replaced the throttle lever with the SB lever to retain the 700R4 (4L60) TV cable. I have Tuner Pro RT and have never tuned an ECM before. I can use all the help I can get. I do understand how the systems work, just haven't done any tuning and not familiar with the terminology. I am hoping to get some direction and advice for the files I need to map this thing and make it sing. The engine is built for dependability and moderate performance. The injectors have been upgraded from 19 to 29 #ph and the fuel pressure will be regulated at 45-50 PSI. Anyone willing to help? Thanks

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,291


    Most member here at gearhead-efi.com use TunerPro to tune with. The TunerPro files you need are located here: http://www.gearhead-efi.com/Fuel-Inj...Information-42

    Getting the Chip programmed with the correct Base Pulse Width (BPW) is the first priority!!!!! I've attached an Excel spreadsheet BPW calculator, with an example screen shot showing the BPW using four 29 lb injectors (each Bank of cylinders of the V8 engine). I personally have not programmed a BPW with a value of less than 100, so I would be very interested to see how the BPW actually works out.

    Based on an original Edelbrock MPFI chip I read, four 19 lb injectors had a BPW 112. Using the spreadsheet, the BPW with four 19 lb injectors on a 5.7 liter engine comes out to 108. The BPW shown in the screen shot should be in the ballpark when using four 29 lb injectors, or maybe the BPW shown in the screen shot is just outside the ballpark and out somewhere in the parking lot??? (That's Tuning)

    dave w
    Attached Files Attached Files
    Last edited by dave w; 10-16-2015 at 04:35 PM.

Similar Threads

  1. 1990 G30 5.7
    By Andy in forum GM EFI Systems
    Replies: 5
    Last Post: 11-02-2014, 05:13 PM
  2. TBI stroker tune EBL flash
    By mtrhead in forum GM EFI Systems
    Replies: 5
    Last Post: 10-08-2014, 05:50 AM
  3. TBI stroker SBC tune
    By mtrhead in forum GM EFI Systems
    Replies: 19
    Last Post: 09-15-2014, 04:52 AM
  4. 1990 k5 blazer ?
    By Rally Smith in forum GM EFI Systems
    Replies: 12
    Last Post: 04-12-2013, 09:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •