connectors 16147060

[mOskit]

hi guys
is there any difference btw black and brown 24/32 connectors?? are the interchangeable? harness doesn`t matter at this stage, i`m just struggle to find those brown one where the black are fairly available

can someone please point where to look for those brown one other than e.ay?

Thanks

[Six_Shooter]

The '7060 uses unique to it connectors. Which is one reason I tend to shy away from using that PCM.

[blue68deville]

I was able to plug in the 7060 connectors to my 7747 by trimming off the locator protrusions (or whatever you'd call those). They're the same otherwise.

[mOskit]

i thought about that. they cannot be that much different. as long as they are ok sizewise. i`m from UK so i`m very limited in regards of ecm.If anything becomes avaiable comes from astrovan V6. i`m doing 7l v8 engine from lincoln.

[Nasty-Z]

Black connectors will work just fine with a bit of trimming to the locating tabs , as mentioned.

My '7060 to '7427 adapter was made with the guts from a '7747 as I didn't want to waste a '7060 for the female connectors .

TOM

[dave w]

The Delphi part # for the 24 pin brown connector is 12160778, using secondary locks 12047900 and 12047901
The Delphi part # for the 32 pin brown connector is 12110112. using secondary locks 12045889 and 12045890
Use Delphi terminal part # 12146448 for 18AWG / 0.80 ~ 1.00 (mm2) wire.

Usually http://www.mouser.com will have the above listed parts.

dave w