Results 1 to 15 of 17

Thread: Looking for a Stock 5.3 Liter / Manual Trans Flash / OS 12212156 .cal .ctz, or .bin

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,304

    Looking for a Stock 5.3 Liter / Manual Trans Flash / OS 12212156 .cal .ctz, or .bin

    I might be asking for a flash that does not exist? It appears manual trans were only available with the 4.8 and 6.0 liter engines?

    Maybe someone has a VIN # from a vehicle with the 5.3 / manual trans that I can then purchase a flash for.

    Thanks in advance,
    dave w

  2. #2

  3. #3
    That file seems really strange. I thought all manual VSS setups were 19 pulse not 40. Plus it shows air flow in the P/N tables. Most true manual tunes do not have any data in the P/N tables for airflow. I really think its a segment swap.

  4. #4
    Fuel Injected!
    Join Date
    Jul 2012
    Location
    Fresno, CA
    Posts
    422
    I looked through the repository at HPTuners and only came across 3 files that were 5.3 with a manual trans. The only one listed as stock was a 2006 Avalanche with 1252075 OS. You might have to use something with a segment swap if you need the factory manual trans stuff.
    1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
    1975 280Z, TBI 350, 700R4
    1953 M-38A1, TBI Buick 231
    1951 Ford Panel, 5.3 with 4L80E

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,304
    I helped out with transplanting a 5.3 into a 67 C10 / with a 3 on the tree manual trans. Currently, the 5.3 experiences an occasional stall during DFCO. The C10 has the brake switch input wired to the PCM and a Dakota Digital 8K VSS, with the appropriate changes to the flash. The easy solution would be to flash a modified original 5.3 / manual file into the PCM. Looks like the flash solution is not going to be easy.

    I agree, the flash linked above appears to be a modified .bin file.

    dave w

  6. #6
    The decel stall could be a combo of air and timing. Idle and low RPM timing control is setup pretty different from auto to manual. TO get you going, I would take a 5.7 manual setup and modify for 5.3. I know the cams are different but the early LS1 will be much closer than running the auto tune.

  7. #7
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    if you can get me a VIN I can pull one from TIS. My 15 min of searching the web I only found 4.3 manual trucks..

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,304
    Quote Originally Posted by roughneck427 View Post
    if you can get me a VIN I can pull one from TIS. My 15 min of searching the web I only found 4.3 manual trucks..
    From an Autotrader search
    Maybe:
    1GCEK14V32Z186112
    1GCEK14V72Z159429
    1GCEK14T02Z183263

    I think one of these is a 4.8 / Manual, don't remember which one.

    dave w

Similar Threads

  1. Is there a 2006 DBW Manual Trans file?
    By 96HawkCnvt in forum OBDII Tuning
    Replies: 25
    Last Post: 08-06-2022, 12:00 AM
  2. Replies: 8
    Last Post: 07-18-2022, 06:03 PM
  3. 1999 454 Manual Trans VSS ?
    By dave w in forum OBDII Tuning
    Replies: 1
    Last Post: 03-12-2015, 01:56 AM
  4. Replies: 15
    Last Post: 10-20-2014, 02:01 PM
  5. Stock .bin for a 94 K3500 ~ 7.4 Liter ~ 4L80E ~ NP241
    By dave w in forum GM EFI Systems
    Replies: 4
    Last Post: 04-02-2012, 05:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •