Page 58 of 72 FirstFirst ... 848535455565758596061626368 ... LastLast
Results 856 to 870 of 1070

Thread: new $EE tuning thing!

  1. #856
    Fuel Injected!
    Join Date
    Jun 2012
    Posts
    32
    Quote Originally Posted by steveo View Post
    increasing the table resolution is possible, you need a space big enough for the larger table, then simply move it and reconfigure it. the benefit would be minimal as map isn't used at a very high resolution anyway.

    why don't you just edit the tables you want to change and enter the new column values? it'll be really easy. you can manually copy the column values out of tunercat's 2 bar definition file if you want to avoid doing the math, they'll be the same.

    Attachment 10935
    Looks easy enough. i'll give it a shot then just save the xdf as EEhack 2bar.

  2. #857
    Fuel Injected!
    Join Date
    Jun 2012
    Posts
    32
    If anyone wants to try this i just copied Cats columns like SteveO said.

  3. #858

  4. #859
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    55
    Preface: 1995 Caprice Classic LT1.

    Here's a connection log (verbose) WITHOUT removing the 3 fuses I mentioned earlier. This is simply plugging it into the car and trying to connect.

    I am able to use this program to flash bins to the car once I remove the fuses. TunerCat's flash program nuked my spare PCM, so eeHack has become my primary flasher.

    That being said, I noticed that when I was flashing a tune today, the program connected, fans kicked on and off, then the purge valve cycled every second or so - all the way through the flash routine. No errors in the process and the car seems to run fine now. Purge valve stopped cycling once the process completed.

  5. #860
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    That being said, I noticed that when I was flashing a tune today, the program connected, fans kicked on and off, then the purge valve cycled every second or so - all the way through the flash routine. No errors in the process and the car seems to run fine now. Purge valve stopped cycling once the process completed.
    thats normal

  6. #861
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    i would just like to bump this thread and say that development still kinda continues, despite me not even having a car (all bikes)

    currently i'm working over some stupid bugs in the last release, and maybe will implement a fuel economy parameter. we'll see.

  7. #862
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    55
    Quote Originally Posted by steveo View Post
    i would just like to bump this thread and say that development still kinda continues, despite me not even having a car (all bikes)
    I, for one, am really glad you're still on the case!

  8. #863
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Any chance of getting the part where you can add the ram/gibberish to the bin being pulled fixed? It's not adding the ram part. Thanks Jonathon
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  9. #864
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    Quote Originally Posted by jthompson122183 View Post
    Any chance of getting the part where you can add the ram/gibberish to the bin being pulled fixed? It's not adding the ram part. Thanks Jonathon
    ill look into it, does it not work at all?

  10. #865
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by steveo View Post
    ill look into it, does it not work at all?
    No it doesn't pull ram when requested
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  11. #866
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    i rewrote the 'settings and config' library a while ago. been notified that the 'silence extra modules' is not working properly either. probably botched that setting too, i'll look at it.

  12. #867
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    Quote Originally Posted by jthompson122183 View Post
    No it doesn't pull ram when requested
    i'm having trouble reproducing this problem. can you do a bin read then give me the debug log? (no need to set to verbose) and maybe even send me a copy of the resulting bin?

  13. #868
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    ok i figured out the extra error counts on connect, the dump ram not working, and the silence extra modules not working.

    there's still a weird bug i can't figure, some users report (and i even have a youtube video) of closing and re-opening the datalog window while data is playing causes the datalog display to go blank? i can't reproduce it on my machine or seem to find a cause...

  14. #869

  15. #870
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by steveo View Post
    i'm having trouble reproducing this problem. can you do a bin read then give me the debug log? (no need to set to verbose) and maybe even send me a copy of the resulting bin?
    I got it figured out, I had a older version of eehack. I installed the 4.6 build and it works now.
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

Similar Threads

  1. 1badcell and thats not the only thing
    By 1badcell in forum Introductions
    Replies: 2
    Last Post: 12-31-2013, 02:25 AM
  2. Replies: 6
    Last Post: 11-27-2012, 09:03 PM
  3. Replies: 2
    Last Post: 11-07-2012, 05:26 PM
  4. Minor thing.
    By historystamp in forum GearHead EFI Forum Support
    Replies: 7
    Last Post: 01-22-2012, 12:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •