Page 5 of 72 FirstFirst 123456789101555 ... LastLast
Results 61 to 75 of 1070

Thread: new $EE tuning thing!

  1. #61
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    some example target idle commands are in the ADX.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  2. #62
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,002

    3.6 New Beta

    Please help me test this gigantic spread of new features...especially the flash stuff, if you're willing to take the risk... and to make sure the automatic transmission parameters are displayed accurately! (the analyzer will use them soon)

    I recommend disabling the "Optimizer" on the flash page if you do not have a socketed ecm.

    I bet most of the features work, but my car is out of commission for the moment, so I can't really test.

    This is a big release, the highlight is really the fact that it patches the flashed bin in-stream, then does versioning requests to the ecm via a mode-3 request and enables some features.... the only real ones right now are target AFR and 'fast rate' datalogging..

    Change list:

    3.6:
    Flash Write:
    * Enable flash write optimizer, to make writes faster and less risky.
    * Enable EEHack patch upload during flash! (Optional)
    * Automatically disable optimizer and large block write in recovery mode
    * Automatically remember last written bin (Auto-compare!)
    * Add "Clear" function to compare bin
    * Syntax hiliting in flash read/write routine status
    Bin Patches:
    * Patch 0x01: Add a new ALDL message for high rate logging
    * Patch 0x01: Include AFR TARGET within both accelerated and normal ALDL messages
    Serial port selection:
    * Moved selector to "Config" tab
    * Save selected port as a config option
    * Automatically go to config tab on bad port selected
    Knock Detection:
    * Added knock warning, turns entire screen red for 200ms when knock occurs
    * Added spark skew knock response, optionally removes 1 degree of spark when knock occurs
    Add auto trans TCC, P/N, and current gear to main tab
    Move "Tests" to "Extended" tab, no need for seperate tests tab.
    ** Enable logging rate accelerator option! (Requires patch)
    ** Enable Open Loop AFR target display (Requires patch)
    "Notes" are now in a seperate (resizable) window
    Prompt user on exit if there is unsaved log data or memos
    Improve data parser per-function to increase synchronzation between elements

  3. #63
    Fuel Injected! fbody_Brian's Avatar
    Join Date
    Mar 2013
    Location
    Biloxi MS
    Posts
    166
    Quote Originally Posted by steveo View Post
    Prompt user on exit if there is unsaved log data
    I was actually thinking about asking for this.I logged a run at the strip and then accidentally closed the program. I did get to see the wideband analysis, but I no longer have the log.Thanks! I'll be doing some testing
    1994 LT1/4L60E Formula

  4. #64
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,002
    honestly if the speed logging patch works the first try it'll be a goddamn miracle but I sure hope it does..... it involves so many new untested functions.

  5. #65
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by steveo View Post
    Please help me test this gigantic spread of new features...especially the flash stuff, if you're willing to take the risk... and to make sure the automatic transmission parameters are displayed accurately! (the analyzer will use them soon)

    I recommend disabling the "Optimizer" on the flash page if you do not have a socketed ecm.

    I bet most of the features work, but my car is out of commission for the moment, so I can't really test.

    This is a big release, the highlight is really the fact that it patches the flashed bin in-stream, then does versioning requests to the ecm via a mode-3 request and enables some features.... the only real ones right now are target AFR and 'fast rate' datalogging..

    Change list:

    3.6:
    Flash Write:
    * Enable flash write optimizer, to make writes faster and less risky.
    * Enable EEHack patch upload during flash! (Optional)
    * Automatically disable optimizer and large block write in recovery mode
    * Automatically remember last written bin (Auto-compare!)
    * Add "Clear" function to compare bin
    * Syntax hiliting in flash read/write routine status
    Bin Patches:
    * Patch 0x01: Add a new ALDL message for high rate logging
    * Patch 0x01: Include AFR TARGET within both accelerated and normal ALDL messages
    Serial port selection:
    * Moved selector to "Config" tab
    * Save selected port as a config option
    * Automatically go to config tab on bad port selected
    Knock Detection:
    * Added knock warning, turns entire screen red for 200ms when knock occurs
    * Added spark skew knock response, optionally removes 1 degree of spark when knock occurs
    Add auto trans TCC, P/N, and current gear to main tab
    Move "Tests" to "Extended" tab, no need for seperate tests tab.
    ** Enable logging rate accelerator option! (Requires patch)
    ** Enable Open Loop AFR target display (Requires patch)
    "Notes" are now in a seperate (resizable) window
    Prompt user on exit if there is unsaved log data or memos
    Improve data parser per-function to increase synchronzation between elements
    * Enable flash write optimizer, to make writes faster and less risky.=THIS IS FAST!

    Enable EEHack patch upload during flash! (Optional)=its patched in the bin but eehack shows no patches up top when connected to the
    pcm during normal operation


    Attachment 9945
    Last edited by jthompson122183; 12-08-2015 at 05:43 AM.
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  6. #66
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,002
    Quote Originally Posted by jthompson122183 View Post
    * Enable flash write optimizer, to make writes faster and less risky.=THIS IS FAST!

    Enable EEHack patch upload during flash! (Optional)=its patched in the bin but eehack shows no patches up top when connected to the
    pcm during normal operation


    Attachment 9945
    so you tried the write optimizer and it actually worked!? wow.

    ok so i guess i need to work on patch detection.

  7. #67
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by steveo View Post
    so you tried the write optimizer and it actually worked!? wow.

    ok so i guess i need to work on patch detection.
    Give me a few mins and I'll have a video up on youtube
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  8. #68

  9. #69

  10. #70
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  11. #71
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    heres the video the pcm is hooked up by homemade bench flash cable

    https://www.youtube.com/watch?v=19ZQd6QiiuQ
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  12. #72
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by steveo View Post
    can you read the bin and see what's at byte 0x3CB3 ?
    t or e side?
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  13. #73
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,002
    t-side (so literally 0x3CB3 in the combined bin)

    it's just an extra byte in the 'flashing string' section that i use to store my version byte. i wonder if it's not stored, or if it's not reading it, or what

  14. #74
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,002
    hah you know what's super funny?

    it doesn't write at all.

    no wonder it was so bloody fast

    the beta i posted is compiled to dummy write so i can test data ordering in the flash routine.

    lets try this again!

  15. #75

Similar Threads

  1. 1badcell and thats not the only thing
    By 1badcell in forum Introductions
    Replies: 2
    Last Post: 12-31-2013, 02:25 AM
  2. Replies: 6
    Last Post: 11-27-2012, 09:03 PM
  3. Replies: 2
    Last Post: 11-07-2012, 05:26 PM
  4. Minor thing.
    By historystamp in forum GearHead EFI Forum Support
    Replies: 7
    Last Post: 01-22-2012, 12:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •