Results 1 to 15 of 1070

Thread: new $EE tuning thing!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,056
    Code:
    RAM:0360 word_360:       rmb 2                   ; DATA XREF: sub_9F91:loc_9FA5r
    RAM:0360                                         ; SPI_chatter_failed_defaults+Fw ...
    RAM:0360                                         ; ALDL mode 4
    RAM:0362 byte_362:       rmb 1                   ; DATA XREF: sub_9FBA:loc_9FCEr
    RAM:0362                                         ; SPI_chatter_failed_defaults+12w ...
    RAM:0362                                         ; ALDL mode 4 stuff
    RAM:0362                                         ; b0 set causes m4 value to be subtractive
    RAM:0362                                         ; b1 clear makes the m4 value a total value
    RAM:0362                                         ; b2 is required to be set to allow any mod
    RAM:0362                                         ; b3 will reset BLM cells
    RAM:0363 byte_363:       rmb 1                   ; DATA XREF: sub_9FBA+19r
    RAM:0363                                         ; ALDL mode 4
    RAM:0363                                         ; b1 and b2 set uses 364 as cylinders to disable
    RAM:0363                                         ; b2 set, b1 clear uses 364 as target AFR
    RAM:0363                                         ; b3 set causes choke fueling to be disabled immediately
    RAM:0364 byte_364:       rmb 1                   ; DATA XREF: sub_A594+A9Fr
    RAM:0364                                         ; SPI_chatter_failed_defaults+15w ...
    RAM:0364                                         ; ALDL mode 4
    RAM:0364                                         ; mode 4 commanded target AFR
    RAM:0364                                         ; or disabled cylinders
    RAM:0365 byte_365:       rmb 1                   ; DATA XREF: sub_D4A5+7Ar
    RAM:0365                                         ; sub_D4A5:loc_D526r
    RAM:0365                                         ; ALDL mode 4
    RAM:0365                                         ; mode 4 commanded spark change(or total)
    RAM:0366 byte_366:       rmb 1                   ; DATA XREF: sub_A057+52r
    RAM:0366                                         ; sub_B76E+74w
    RAM:0366                                         ; ALDL mode 4
    RAM:0366                                         ; duty cycle for ???(106C)
    RAM:0367 byte_367:       rmb 1                   ; DATA XREF: sub_ECEE:loc_ED56w
    RAM:0367                                         ; sub_ECEE:loc_ED69r ...
    RAM:0367                                         ; 8885 stored here, gets counted down
    RAM:0368 byte_368:       rmb 1                   ; DATA XREF: sub_E26Cr
    RAM:0368                                         ; buffer overflow test byte
    RAM:0369                 rmb 1                   ; bottom of stack
    v6 mode4 stuff for reference. so it does have commanded spark, afr, and cyl cut. awesome.

    so what 'bout idle target?

    im going to pull your adx and have a look too. at least if i can get V6 commanded spark to work with my autospark table thing it'll be super useful for V6 tuning.

Similar Threads

  1. 1badcell and thats not the only thing
    By 1badcell in forum Introductions
    Replies: 2
    Last Post: 12-31-2013, 02:25 AM
  2. Replies: 6
    Last Post: 11-27-2012, 09:03 PM
  3. Replies: 2
    Last Post: 11-07-2012, 05:26 PM
  4. Minor thing.
    By historystamp in forum GearHead EFI Forum Support
    Replies: 7
    Last Post: 01-22-2012, 12:00 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •