in scan9495 error 51 eeprom programming dtc shows up. when comparing before and after flashes 0x3848 Shift Time (sec) Vs. %TPS Vs. Shift, Normal Mode, High Alt. table has 3858 as FF instead of what was originally there.
ah, is that an automatic transmission bin? it shouldn't have done that. i'll look into it.

in scan9495 error 51 eeprom programming dtc shows up.
i guess i screwed the checksum up.

i think read flash is not working by that i mean that eehack will pull the bin but not to prompt to save it
thanks i'll look into that too

appreciate the testing!