Results 1 to 6 of 6

Thread: $0D and $0E Governor Parameters

  1. #1
    EFI tuning addict 96lt4c4's Avatar
    Join Date
    Jan 2012
    Location
    Bardstown KY
    Age
    44
    Posts
    267

    $0D and $0E Governor Parameters

    Since I put my 80E in, I am getting a weird shift from 1st to 2nd. It feels like the truck stalls for a split second before shifting. looking at the data log and that's Just what it shows. For some reason when the second gear shift happens, the timing drops to zero momentarily then comes back up. Torque management is zeroed out and my shift times are at zero or .2 seconds. The gov. parms were populated in my base tune. I checked my old $0D tune and they were all zeroed out. I am not real sure on what they due. Just wondering if this could be part of my problem.
    Last edited by 96lt4c4; 09-28-2015 at 03:51 AM.

    -1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
    -2002 Cavalier, Tuned with HP Tuners
    -1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I would compare $31 and $OE with 4L80E code, not $OD which was 4L60E code.

    dave w

  3. #3
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    Once upon a time I was told that GM deliberately dropped out timing during shifts of the 60E. Larger applications often saw a greater reduction. True or not, it's something I've noticed for years.

  4. #4
    EFI tuning addict 96lt4c4's Avatar
    Join Date
    Jan 2012
    Location
    Bardstown KY
    Age
    44
    Posts
    267
    Quote Originally Posted by dave w View Post
    I would compare $31 and $OE with 4L80E code, not $OD which was 4L60E code.

    dave w
    Ok, I will check it out. I compared a 454 $0E and the 350 $0E that I am using. The 454 bin did not have any governor setting set, all zeroed out.

    -1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
    -2002 Cavalier, Tuned with HP Tuners
    -1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)

  5. #5
    EFI tuning addict 96lt4c4's Avatar
    Join Date
    Jan 2012
    Location
    Bardstown KY
    Age
    44
    Posts
    267
    Quote Originally Posted by 1project2many View Post
    Once upon a time I was told that GM deliberately dropped out timing during shifts of the 60E. Larger applications often saw a greater reduction. True or not, it's something I've noticed for years.
    I guess that would be considered torque management? I knew these PCM's had some early forms of TM in then. My XDF only has one scaler for this and its zeroed out.

    This is causing some spark knock when the timing comes back up from zero, since I have a turbo spark knock is no good. I have lowered timing trying to get rid of it, then i finally realized what it was doing.

    -1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
    -2002 Cavalier, Tuned with HP Tuners
    -1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)

  6. #6
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    The 700 was a very unreliable trans in the early days.

Similar Threads

  1. $0E / $31 XDF Missing transmission parameters.
    By 1BadAction in forum GM EFI Systems
    Replies: 48
    Last Post: 12-12-2014, 06:29 PM
  2. tbi cold cranking parameters
    By mamigacz in forum GM EFI Systems
    Replies: 3
    Last Post: 11-20-2013, 04:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •