A219_0E_31_v250.adx, PE not working

[93V8S10]

I've been wading my way through the PE code and trying to make a flow chart. I had hoped to have something to share by now but don't, thought I was close but I had missed a few things. This code is very complicated (for me anyways), there is a lot going on, much more than I expected.

[93V8S10]

Finally made my way through!

Hope this helps everyone with setting-up PE. I know that I will have a different prospective when it comes to my truck.

[gregs78cam]

I knew there was a lot to it, but

[EagleMark]

Holy crap Batman!

Can you make an easy button in the xdf?

That was a lot of work! Thanks 93V8S10!
Does this apply to all $OD, $OE etc... I'd like to add it to each ECM infor thread it pertains to?

[93V8S10]

I believe that $E6, $0D, $0E, and $31 are all the same in this area of the bin, except for different addresses. The addresses shown are for $0D, $E6 will be a few bytes behind, $0E will be a few bytes ahead, and $31 will be two bytes ahead of $0E.

I'll look into it and update the zip file above with the different addresses.

[JeepsAndGuns]

Wow, I'm sure that was a lot of work. But looking at it, I have no idea what I am looking at. Basicly I am too stupid to make any use of it. What is it and what does it mean, and how do you use it?

[93V8S10]

Basically it allows you to see the order that the code uses each parameter and for what, at least that was the goal. Did you see the other page with the new names and descriptions? This page may be the most help.

[JeepsAndGuns]

Yea I saw the chart (or whatever the proper name for it is) There is a lot of stuff it goes through before it will go into PE. So much in fact that I get lost in the chart after the first few boxes...lol
Is the first part something thats supposed to be added to the XDF? If so, then I would have to send my xdf to someone else to have it done, as it is lightyears over my head.

[EagleMark]

It is very complicated but he has gone into great detail of the entire procedure. I think all that is needed is already in the XDF it's just a matter of testing. Delay to 0 or 1 over 70 seconds will be a quick deciding factor.

[EagleMark]

I believe that $E6, $0D, $0E, and $31 are all the same in this area of the bin, except for different addresses. The addresses shown are for $0D, $E6 will be a few bytes behind, $0E will be a few bytes ahead, and $31 will be two bytes ahead of $0E.

I'll look into it and update the zip file above with the different addresses.

That would be another huge amount of work really not needed if you just added the above quote to PE zip file already done. Since most people would not be making changes based on address but rather XDF... IMO...

[93V8S10]

Yea I saw the chart (or whatever the proper name for it is) There is a lot of stuff it goes through before it will go into PE. So much in fact that I get lost in the chart after the first few boxes...lol
Is the first part something thats supposed to be added to the XDF? If so, then I would have to send my xdf to someone else to have it done, as it is lightyears over my head.

There is a second page to the Excel file that has the proposed changes to the xdf and descriptions for each parameter. All of the parameters are already in the xdf you have, except for one, but the names are a little misleading.

[93V8S10]

That would be another huge amount of work really not needed if you just added the above quote to PE zip file already done. Since most people would not be making changes based on address but rather XDF... IMO...

It's already done!

[JeepsAndGuns]

There is a second page to the Excel file that has the proposed changes to the xdf and descriptions for each parameter. All of the parameters are already in the xdf you have, except for one, but the names are a little misleading.

Oh, ha, I didnt even notice that 2nd page.
So the name of the xdf parameters should be changed to whats listed? Same for the discriptions? I might need a good step by step on how to do that.

[93V8S10]

Yep, thats what I was trying to say.

A step by step could be arranged. The changes to be made aren't hard at all.

[EagleMark]

It's already done!

OK so $OD, $OE, $31, $E6... I think... am I forgetting any? My fever hit 102 today so I'm... well I shouldn't be here... but want to put this in each of the ECM info threads.... in a couple days...