New member from Scottsdale, AZ

[BUBBAMWN]

Thank you for allowing me to join GearHead EFI. My current project is a 88 Suburban 4X4 V20 it has less than 100 miles on a new 383 and freshly rebuilt turbo 400. Recently received from Moates all the hardware needed to start tuning. Looking forward to learning and assisting others on this forum.

[dave w]

Is the computer you have the 1227747? Here is a link to some useful information on the 1227747 ECM. http://www.gearhead-efi.com/Fuel-Inj...Information-42

I'm sadden to say, eaglemark passed away earlier this year. Eaglemark started this site, his knowledge and support of the EFI community has and will be missed!

dave w

[BUBBAMWN]

Sad to hear that Eaglemark has passed. I'm sure that we can continue to grow and learn from the info that Eaglemark has compiled to make this forum one that he would be proud of.
Dave W thanks for welcoming me into GearHead EFI forum. I'm assuming by your avatar that you reside in Arizona as i do.
Yes the computer that I have is the 1227747, i have started off using the following bin ADYR_88_G-R-V_5_7TBI, XDF $42-1227747-V4T, ADX $42-1227747-V3T. The 1227747 computer is installed in a 1988 Suburban V20 it has a new 383,
COMP CAM PART # 12-388-4 Duration @ .050 INT 206 EXH 212,
EDELBROCK 3704 Performer Manifold
HOLLEY 502-6 TBI. Electric radiator fans , freshly rebuilt Turbo 400. just about everything under the hood is new, If there is any other specs you would like to have please let me know.
I have the MOATES APU1 AutoPROM and G2 memory adapter installed. I have been successful in emulating and datalogging just trying to figure out where to go next. The truck runs but not very smooth i haven't not driven it yet with the MOTES hooked up. I will check out the link you provided me and hopefully find some guidance. Thanks in advance for your support and guidance.
Bob