Ok so I'm trying to data log, I've read tutorials but they don't say stuff like use the ???? Cable and hit this button so I had emulation cable and aldl cable hooked up.... Only baro and some coolant readings.... Tried just aldl cable and pushing buttons still same stuff.... I downloaded the correct ads file but tunerpro said can't load so I imported ads as adx, what am I doing wrong??
Also switched 10k switch with no change
thanks everyone
Bring me up to speed on what you are working on, computer and such.
dave w
Ok I tried data logging on 2 different vehicles. 1st was a 1985 fiero with 1990 2.3l quad-4, 707 ecm, 8B mask.... Then I tried a 1994 truck yesterday with 427 ecm and 0D mask....same result. Pulls list but has 0 in all but the temperatures and baro's. Example; start temp reads -40 Celsius. I loaded files and they show up top, I've hit start/stop button, data tracing, switched between dash options, switched both switches on aup1 (oh yea aup1 with tuner pro rt5) I can tune both vehicles emulating and burn chips but just no data logging. I haven't let the smoke out of the aup1 so still scratching my head.
I'm wondering what your "Com Port" settings are?
From TunerPro RT:
Tools
Preferences
Data Acq./Emulation
See screen shot.
dave w
Ok checking now
Awesome thank you for the picture!!!!! That helps!!!
Ok the "interface type" drop down was blank, now it looks like yours. I will try to data log real quick and see
Nope still same, I'm looking for com port settings now
Ha don't know what to do now that I'm here
What are your com port options? Usually I see two or three different com ports to choose. Usually I see com port 3, or com port 7, or sometimes com port 10. Try selecting a different com port to get the data log working.
dave w
In that pic it has "com1" mine has "{com1}" and no way to change it. I'm looking at the device manager-ports (COM&LPT1)-USB Serial Port (COM3) and changed that to com1 in PROPERTIES-advanced settings. Should I change anything here?
Ok data log works now but autoprom does not.....still looking
Good job getting the data log to work.
I don't have an Autoprom, so I'm not much help with that. I think there are some Autoprom settings in the same place as the data log settings?
dave w
Have you read this document on moates.net? http://support.moates.net/troublesho...apu1-autoprom/ I don't have an Autoprom but I do have an Ostrich 2.0. The link shows the proper settings and switch positions.
Brian
Yea just tried all that plus returning to default and no emulator. I had instruction sheet next to laptop to make sure of settings. Reversed all I did....either pass through mode or nothing, no matter what I do, I'll try it on a pc later
I wonder if you need to set the Mask Code to AA, which disables checksum when you are emulating.
dave w
Posting Permissions
Reply With Quote
Bookmarks