new member with a 97 Tahoe with a 383 vortec - with some modifications...

[MazingerZ]

Hello, been lurking around for a while, just found out the way to post :-) my intro

so, I have a 97 Tahoe (2 Door), with some modifications on the engine, transmission, axels, suspension & tires.

I live in the middle east, but I am a westerner, I use my Tahoe for camping trips & desert dunes crossing....good fun indeed.

I have been doing a lot of reading on the I Gen vortec EFI system and now managed to get Jet DST software.

So now, I am looking forward to learning some more and help others where I can.

here is a list of the Mods done to my truck

383 SBC Vortec
Compcams 12-422-8 CS XR270HR-10
STS performance 1.6 rockers
Edelbrock 60989 heads 200cc
Speed-Pro Hypereutectic Pistons H859CP30 12cc
CompCams-15853-16 short travel Hydraulic Roller Lifters
Manley 25734-16 Pushrods- 4130 5/16 7.100
High Volume Oil and Water pumps
New Delco MPI Injector Spider conversion Assembly
160* Thermostat
BBK 80mm throttle body
K&N Stage 2 intake
New Spark Plugs Champion RC12YC and Accel 9042 Extreme Cables.
Delco distributor + gear
Summit Racing SUM-29006B-C MAF sensor
Thorley Headers 1 5/8" ID and 2 1/2" ID THY-301Y-FED
Gibson 315501 catback exhaust and No Cats

On the 4L60e
Corvette 1-2 servo
Beast sunshell
HD TransGo Kit & sonnax servos from Dana Wilkes of Pro-Built in CA
stock S10 Blazer Torque Converter

315/75-R16 Cooper ATR Tires
4.88 Motive gears
Detroit -no spin- locker on the rear 10 bolt
Bilstein shocks all around
add-a-leaf from Rough Country to lift the rear 2"
Uprated GL torsion bars (off a 97 suburban), cranked 2" - hard on the road, awesome on the dunes

that's it for now

Cheers
MZ