I have three GM throttle bodies from S-10 2.8L mounted on my 48 Lincoln Flathead V-12. (Looks sharp.) However, the part no. 5235130-ACR TBI injectors flow about 33 lb/hr. Figuring the 60 deg V-6 was about 125 HP with two injectors, my 180 HP V-12 with 6 injectors will need a flow rate of about 1/2 the 33 lb/hr rating. Is there some way to slow the injectors down? Might there be an injector with a lower flow rate? How low can I reduce the pressure and still get a good spray? Other ideas?
Thanks
Abe