TunerPro Rt used as a scan tool?

[EagleMark]

Like a 14 bolt needs a truss!

The rest sounds like fun.

Well I have a few hours into the adx for you. It may or may not hook up and record data first shot. I'm getting better at this so give it a try and let me know how it works. DashBoards are installed but not all values are set. Right click on item and put what you want where.

Item lists have engine data, Error Codes and Switches.

If it hooks up first time get a data log so I can work on it further. If not we will make small adjustments till we get one solid connection first time every time!

Your lucky that Dan T (Sil - 60degreev6.com) wrote a very complex xdf for this engine. I started working on it with data tracing. If you want simple to start get the one named $DF.xdf

If you want the more complex that will have data tracing get the set of
$DF-16149396-V1.xdf
and
$DF-16149396-V1.adx

Your bin is also in this thread with adx and xdf.
http://www.gearhead-efi.com/Fuel-Inj...Information-DF

[gregs78cam]

Once you get the correct .adx working, seeing which codes are active, is not all that hard, but you would be better to set up a different dash for just that purpose. You could populate it with just malfunction flags from the bitmask section, and maybe a couple of key sensor outputs, like what you would see in a OBDII scantool. So you would connect the DA and then when you turn the key on any active codes should show up.

[EagleMark]

I never thought of a dash for error codes? Cool!

I set that up for him so he has an Item List page for error codes.

[gregs78cam]

Oh yea I forgot those are all in the item list/sensor data window.

[mudbuggy]

Wow, I just got rid of my headache before I read the thread. Then I reread the thread, I think I'll need more asprin. I'll go out there this coming weekend, like in 5 days and plug in to the lumina. Now where do I start??????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ??Hope???????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ??????you????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????? get??????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ???? the??????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ???? picture. I just got the basics understood, you guys remind me of getting in country just landing on the tarmac with 2 linguists but neither one speak the correct dialect. DOH!

[EagleMark]

Well you just did it on your truck, so what's the issue? Same thing, differant files.

Back in this thread I had them ready to try:
$DF-16149396-V1.xdf
and
$DF-16149396-V1.adx

Your bin BDJS is also in this thread with adx and xdf
http://www.gearhead-efi.com/Fuel-Inj...Information-DF

[mudbuggy]

So how do I see the codes themselves? Is it in the parameter tree? Do I need to open that and then poof? They appear?