I'm swapping a Vortec 350 w/4l80e in my 93(originally 2.8 tbi/5 speed)

Motor and Tranny are in. Now I'm on fuel delivery.

Originally I was planning on just swapping the fuel pump from the donor truck but its way bigger than the stock tbi pump and wont fit in the tank.

So now I'm thinking to run the stock tbi pump with an inline pump such as this one: http://www.summitracing.com/parts/vp...91bx/overview/

This pump has maximum of 85 psi. The CSFI injection runs at about 60-65.

So can I just install one of these with a regulator and I'll be good to go?

Really appreciate the help. Thanks