PE Spark Advance $OD w/16196395 using DIS

[CFI Z51]

I had the same issue with $0D when not running a knock sensor and bin setup like you have...
I would try a resistor on the knock input and enable code 43..and retard...you may be able to just alter the min/max KS volts in the bin.

I have an XDF with these added if you need it.
L4E6A: FCB 160 ; 16 SEC'S. HI VOLTS CK PERIOD
L4E6B FCB 230 ; 4.5 VDC A/D UPPER VOLTS LMT
L4E6C FCB 20 ; 0.390 VDC A/D LOWER VOLT LMT
L4E6D FCB 23 ; 4 DEG, KNK FAIL RETARD