Results 1 to 3 of 3

Thread: 1999 camaro ls1 to ls3 need for bin or cal file

  1. #1
    Carb and Points!
    Join Date
    Apr 2015
    Age
    55
    Posts
    1

    1999 camaro ls1 to ls3 need for bin or cal file

    Hi
    We have make engine swap from LS1 to LS3 to 1999 Chevrolet Camaro. We use throttle cable, not electric.. we use orginal PCM and need is for new bin och cal file.
    LS3 engine is LS376/480 from GM performance parts.
    Transmission is auto
    Rear End Gear Ratio: 3,55
    Current Tire Size: 275x40x18
    Anyone ?

  2. #2
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    If the new ls3 engine has 58x reluctor wheel you will defenitely need the newer design pcm to run the engine.
    This engine has upgraded hot cam so stock calibration is not an option for you.
    Auto transmission makes it even more complicated.
    You will need custom tune either way.

  3. #3

Similar Threads

  1. 1999 TunerPro Bin Files
    By EagleMark in forum TunerPro OBDII Bin Files
    Replies: 9
    Last Post: 03-23-2023, 02:21 AM
  2. 1999 TunerCat Calibration Files
    By EagleMark in forum TunerCat Calibration Files
    Replies: 6
    Last Post: 06-14-2019, 12:50 PM
  3. 1999 454 Manual Trans VSS ?
    By dave w in forum OBDII Tuning
    Replies: 1
    Last Post: 03-12-2015, 01:56 AM
  4. NEED BIN FILE FOR 1990 CAMARO
    By 1227730 IROC in forum Introductions
    Replies: 2
    Last Post: 08-23-2013, 08:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •