Here is one body list.
http://en.wikipedia.org/wiki/List_of_GM_platforms
It's a wiki so I think it is legal to copy it.
I saw another simpler list somewhere. another Wiki i thougt
Robert
Here is one body list.
http://en.wikipedia.org/wiki/List_of_GM_platforms
It's a wiki so I think it is legal to copy it.
I saw another simpler list somewhere. another Wiki i thougt
Robert
Last edited by historystamp; 01-02-2012 at 10:38 PM.
Nice link!
Here's another from Wiki better in it tells how to use vin number for engine code too
http://en.wikibooks.org/wiki/Vehicle...)/GM/VIN_Codes
I know of others but they are pre EFI era. Maybe we can compile our own for the EFI years to cover Body letter code. Would be a lot easier to match to ALDL files and get the correct one, like below?
Vin = P is engine and the Y and B are bodies. Sometimes it'a hard to figure correct data stream for car without some research...
DATA STREAM A275
ENGINE USAGE:
5.7L MFI (LT1) (VIN = P) 1994 1Y - CAR MANUAL TRANSMISSION
* 5.7L SFI (LT1) (VIN = P) 1995 1Y - CAR MANUAL TRANSMISSION
DATA STREAM A276
ENGINE USAGE:
5.7L SFI (LT1) (VIN = P) 1994 1,4B 6D - CARS
4.3L SFI (L99) (VIN = T) 1994 1B - CAR
* 5.7L SFI (LT1) (VIN = P) 1995 1,4B 6D - CARS
* 4.3L SFI (L99) (VIN = W) 1995 1B - CAR
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
It would be nice to expand your table with more entries.
I've been looking at trying to go from the ALDL INDEX.DOC info to what is found in the BCC lookup.xls table. I thought I could get closer. I was hoping to write a program to do the matches, but I cannot get even close to coming up with an algorithm.
Here is what I found for my car. Not even sure what year. It is a 93 model year. BCC lookup.xls lists as 1992. This data is from INDEX.DOC.
How found? ECM sticker to BCC lookup.xls to INDEX.DOC.
DATA STREAM A167
ENGINE USAGE:
2.2L MFI LN2 (VIN=4) 1992 1J,L
2.2L MFI LN2 (VIN=4) 1993 1J,L,W,3A,4A
Here is my car in my car data from the BCC lookup.xls table. I made it a one line excel sheet. I found this via looking at the sticker on the ECM.
Corsica-16184461-BCZB.xl
Now I want to reverse the search.
This is as far as I can get with the data from INDEX.DOC for my car. I am using 2.2L, LN2. How do I get farther?
aldl-a167 to bcc table.xls
I'm not sure how clear I am on this. Ask away.
Robert
Last edited by historystamp; 01-20-2012 at 12:18 AM.
Well there's a online BCC project being built now that will replace the BCC lookup xls and do it online for you and if the bin is in the library give it to you.
Not sure how to answer your question thouhg? ALDL INDEX.DOC is for data acqusition which has the info how to make an ADX file for TunerPro.
The BCC lookup is to see what a bin file is for...
The TunerPro Lookup tells what files are needed for it to work...
You'd like to combine all three?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I know about your effort. I was hoping to add to it.
I'm in the process of converting INDEX.DOC to Excel. I'm doing only the Engine entries.
Here is where I found INDEX.DOC
Please see post #1 in this thread.
http://www.gearhead-efi.com/Fuel-Inj...=4164#post4164
Here is what I have. (( THere could be mIstakes. ))
dataStreamTable.xls
Now, I would like to merge this with
BCC lookup-1 copy.xls
Here is where I found the xls
http://www.ihonlynorth.com/forums/at...bcc-lookup.xls
I do not seem to have enough data in my uploaded file, to do the merge.
Robert
Last edited by historystamp; 01-25-2012 at 10:17 PM.
Worthy project!
Espeacilly if your good with Excel and stuff. Not my forte... but what are you needing to continue?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Bookmarks