Results 1 to 2 of 2

Thread: 1990 highly modified 434 corvette tune issue

  1. #1
    Carb and Points!
    Join Date
    Oct 2013
    Location
    WI
    Age
    56
    Posts
    2

    1990 highly modified 434 corvette tune issue

    I am trying to tune a 1990 corvette with a 434 CID with 60 lb injectors and I am having a problem, and am looking for some advice. The car idles and drives fine at light throttle but as soon as I get past 25% throttle at 4 volts on the MAP sensor the car appears to go into some sort of limp mode. The car will stumble set the check engine light for a code 33 and cut the injectors pulse from 4 ms to 2 ms. So far I see nothing in the tune that will cause this, any ideas on what is happening? One other issue is if I go straight to full throttle it does take off but my pulse width gets limited to 6.9 ms and the engine goes lean at high RPM.

  2. #2
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    it was discovered long ago on thridgen.org that 8D had a fueling quirk like this that only happens on large displacement engines(or maybe it was large displacement and large injector? either way).

    http://www.thirdgen.org/forums/diy-p...limit-fix.html
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


Similar Threads

  1. Setting up a bin for modified engine.
    By EagleMark in forum GM EFI Systems
    Replies: 9
    Last Post: 01-28-2016, 03:44 PM
  2. 1990 Corvette (Y Body) ADX File?
    By C4ProjectCar in forum GM EFI Systems
    Replies: 6
    Last Post: 12-08-2014, 09:30 PM
  3. flashing modified .bins?
    By skandolis in forum OBDII Tuning
    Replies: 1
    Last Post: 09-07-2014, 07:05 AM
  4. 91 Corvette ADX issue
    By deepa in forum GM EFI Systems
    Replies: 0
    Last Post: 08-31-2013, 11:35 PM
  5. Replies: 6
    Last Post: 09-26-2012, 06:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •