Page 11 of 11 FirstFirst ... 67891011
Results 151 to 156 of 156

Thread: Another option for $0D efan control

  1. #151
    Fuel Injected! PJG1173's Avatar
    Join Date
    Nov 2011
    Location
    Jacksonville NC
    Age
    50
    Posts
    641
    under fan b calibration you should have 3 scalars labeled "Engine or Transmission Temperature" 1 through 3. set them all to "AE" as per the scalar descriptions:

    Engine or Transmission Temperature 1
    Location: 70CD


    Set to A2 (00A2 coolant temperature) to use Fan B for cooling engine.
    Set to AE (00AE transmission temperature) to use Fan B for cooling transmission.


    Engine or Transmission Temperature 2
    Location: 70E5


    Set to A2 (00A2 coolant temperature) to use Fan B for cooling engine.
    Set to AE (00AE transmission temperature) to use Fan B for cooling transmission.


    Location: 710A


    Set to A2 (00A2 coolant temperature) to use Fan B for cooling engine.
    Set to AE (00AE transmission temperature) to use Fan B for cooling transmission.
    87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
    93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
    05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,

  2. #152
    Fuel Injected! Davis_1377's Avatar
    Join Date
    Feb 2013
    Age
    34
    Posts
    58
    I see my problem. I must of been using the older .xdf I found $0D Fan Control v100.zip and it had the scalars I needed. Thanks for yalls help.

  3. #153
    Carb and Points!
    Join Date
    Sep 2014
    Location
    marrero la
    Age
    50
    Posts
    6
    new at tuning do i add to existing xdf or open fan xdf after and set ?

  4. #154
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    50
    Posts
    504
    Easiest is to just open the xdf when you want to change the fan settings. Be careful to double and triple check the code you are adding to your bin for e-fans.

  5. #155
    Carb and Points!
    Join Date
    Sep 2014
    Location
    marrero la
    Age
    50
    Posts
    6
    I loaded the XDF and set my setting it only put hex for those settings.I thought it was going to be that easy, then download a Bin from this topic if you go to page 7 i think you can download it that's how i figured that out it ain't that easy. I have learned a lot from this forum maybe I'll find a write up about writing hex editor If anyone knows somewhere i can learn more please point me in the right direction O by the way I think I got the fans figured out

  6. #156
    Carb and Points!
    Join Date
    Sep 2014
    Location
    marrero la
    Age
    50
    Posts
    6
    How could i get the trans fan to control a heated o2 sencer, just a thought.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •