Thanx to Six_Shooter and Fastacton, for their words of wisdom

With the G1 Adapter in the 1227165 ECM & Tunerpro RT V5 running and the APU1 ( Autoprom ) hardware connected and seen in Tunerpro, ( at the bottum bar ) I had both sliders set towards each other ( autoprom mode ) I loaded ONLY ( Eaglemarks words ) the Datastream def for the $6E Mask, 1227165-6E by Mark. Hit connect and was very happy to see Data flowing, in the 8192 baud, now I see why a lot of people have switched from the $32 mask. Hopefully this will help someone, I did not have any issues with the 1227165 ECM clamming at all, probably have at least a 20 min Datalog. Happy Tuning......Thanx All.

MrStude

M1Methanol is yer Friend!