Results 1 to 8 of 8

Thread: 16188051 bin BMFN question

  1. #1
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330

    16188051 bin BMFN question

    Attached is bin BMFN that I worked, it's for 95 LT1 Camaro engine/auto going in a street rod. Noticed that BMFN is for a 6spd. Will the bin get me started as is, any suggestions?

    Driveline: 95 LT1 engine, automatic, no egr, no A/C, 3:42 gears, using MAF and Derale two speed electric fan.

    Also...what's the history of the 95COP bin it looks like a very basic bin that could also work for my application?

    Thanks
    Attached Files Attached Files
    Last edited by EDZIP; 07-01-2015 at 02:50 AM.

  2. #2
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    i opened bmfn in tunerpro and it has a cal id of 16210011 according to http://fbodytech.com/bin/index.html bmfn is from a 94 fbody a4 with 3.23 gears. someone changed the cal id for 95cop so youll have to do some digging to figure it out.

    Attachment 9208Attachment 9209
    Last edited by jthompson122183; 07-01-2015 at 02:35 AM.
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  3. #3
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330
    Quote Originally Posted by jthompson122183 View Post
    i opened bmfn in tunerpro and it has a cal id of 16210011 according to http://fbodytech.com/bin/index.html bmfn is from a 94 fbody a4 with 3.23 gears. someone changed the cal id for 95cop so youll have to do some digging to figure it out.

    Attachment 9208Attachment 9209
    Should have mentioned that it was from a 94 Fbody...prefer to use it and save the original 16188051 (BMFP) for final use. Should I replace the 1994 BMFN with 1995 BMFP?

    Thanks for the link...

  4. #4
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    well it depends on what year the a4 is. there's a difference between 94-95 a4. 95 has a extra wire in harness for pwm solenoids. 94 doesn't have pwm trans.

    check this out also http://www.impalassforum.com/vBullet.../topics/269586
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  5. #5
    Fuel Injected!
    Join Date
    Oct 2013
    Posts
    1,022
    As pointed out, you need a 95 bin to work with a 95 engine and transmission combination.

    Probably any factory 95 bin would work as a starting point if you delete the AIR, EGR, CCP and VATS. You could use Steveo's automatic bin generator to start.

    http://fbodytech.com/autotune.html

    You can find all his info here. Pay attention to the first link and read it to understand some tricks needed when tuning EE. Lots of good info including a bunch of factory bins.

    http://www.fbodytech.com/

  6. #6
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330
    Thanks guys..great info and links to work with.

  7. #7
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330
    Just to clarify....are the innards of the 94 and 95 16188051 the same?

    If so, could I install a 95 knock module and 95 bin in the 94 PCM?

  8. #8
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by EDZIP View Post
    Just to clarify....are the innards of the 94 and 95 16188051 the same?

    If so, could I install a 95 knock module and 95 bin in the 94 PCM?
    yep identical. any 16188051 pcm will work doesn't matter if a4 or m6 or bbody. the only difference is the bin.
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

Similar Threads

  1. LT1 ECM 16188051 repair source?
    By EDZIP in forum TunerPro Tuning Talk
    Replies: 51
    Last Post: 08-17-2021, 07:22 PM
  2. 16188051 and 16181333 PCM Information $EE $EEB
    By EagleMark in forum GM ECM - Bins - TunerPro Definition Files - Wiring Diagrams - Tuner Info!
    Replies: 13
    Last Post: 10-05-2014, 08:42 PM
  3. 16188051
    By buddrow in forum GM EFI Systems
    Replies: 0
    Last Post: 03-15-2014, 07:54 AM
  4. Which programming software LT1 16188051 PCM ?
    By EDZIP in forum GM EFI Systems
    Replies: 6
    Last Post: 01-30-2014, 03:12 AM
  5. 16188051 with DIS ignition module?
    By brian89gp in forum GM EFI Systems
    Replies: 5
    Last Post: 08-13-2013, 03:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •