LQ4 Power

[Roadknee]

I am very excited to see the L92 cam I have designed in a 408 stroker.

When you design a lobe, do you run all the math by hand to come up with your lift curve, velocity and acceleration rates, or do you use computer software? Have you ever tested your designs on a Spintron to verify stability? Who develops your masters and does your cam grinding?

[Skinny Pedal]

When you design a lobe, do you run all the math by hand to come up with your lift curve, velocity and acceleration rates, or do you use computer software? Have you ever tested your designs on a Spintron to verify stability? Who develops your masters and does your cam grinding?

Math is by hand based on theoretical flow and actual head flow, followed by a double check from a good friend. Lopes are designed with velocity in mind first, followed by valve acceleration and cyl pressure. For grinding and masters I hand over the math and ideas to someone much more advanced than me. :) Would rather not name. Needless to say he has been around.