Exhaust is finished up to the muffler, all O2 sensors in place and all the gaskets fitted, so the exhaust is all sealed up. Airbox is fitted, now I can get the intake tube finished up, and the boost control actuator is mounted and has the full range of motion it needs.

Engine bay is pretty much finished, I have the big vacuum block connector under the dash left to plug in and need to re-route the fuel pump control wiring so I can fit the hood latch cable grommet in place.

Need to weld up a hole in the floor under the seat, and scrub the floor down to lay in the dynamatt and new carpet. After all that, it's down to reassemble the dash plastics with the new stereo and I am realizing this very second I should have changed the dash speakers out prior to installing the dash...