That log is from your E-side ADX, I haven't looked into the command macro structure yet.
Been working on finishing up the paint work and A/C hoses, once that is done it's basically just down to making it run. Only missing part (completely missing) is the air-to-water I/C, all the parts are made save the hoses and actually fitting the tank, pump, and heat exchanger, but all that will wait till it runs, 'cuz I gotta work out a method to cycle the intercooler pump based on IAT. (I think I can hack the current OE code to do that, based on EGR stuff.)
Bookmarks