OK, FTDI cable came in today, but I can't select 8192 baud, only 9600...argh. I KNOW this cable is an FTDI FT232RL, so what gives?

Also, even with it passing the tunerpro test for cable, it will NOT connect to the ecu. I have ALL the system grounds and ecu grounds and the sensor grounds grounded. I have both battery feeds and the ignition feed powered. I have the serial ground connected to the system ground. I have the serial tx and rx connected to the serial line on the ECU. Still will not talk at all.

What gives? I want to connect and talk to the ECU to find out what bin I need to be working with.