Anyone worked with the 16196397 yet?

[Xnke]

Ok, so I've gotten started on the programming here. I'm totally confused, the file naming conventions are...interesting.

I am wanting to start with the 1995 3100 beretta program, since I believe it will be closer to the end result than starting with the 3.4L F-body program. From there, I want to make the changes talked about early in this thread, then post 'em up and see if they're ballpark-correct.

The ECM to be used is a 16196397 BKRL. This was pulled from an apparently modified Beretta, with a 3100 engine and a manual transmission. God knows where it started out from.

Looking through the P66 BIN files from the thread for this PCM, I've found the Rev3 L-body folder, and have file names such as:

16230734B 94 L original FDR export lying speedometer.bin
16227354 95 L.bin
Others with similar structure.

Now, I belive the 162... number denotes the service tag? If so, my service tag isn't listed. Which of these bins should I choose to start with? Any? I have poked around in the "95 L.bin" file for now. I've got it patched with the two patches from the Boosted XDF.

Next, I need to open up a 96+ L67 calibration file and pull the injector data from it. I imagine I'll need an OBDII program to open up the calibration, hunt down the injector data, and then re-work the injector data to work in the OBD1 computer. What program to open the cal, and what parts of the injector data do I need?